XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.179 2002/01/16 18:36:00 dawes Exp $
/******************************************************************************/
/*
 * This file is to provide a quick method for most people to change the
 * behaviour of their XFree86 installation without having to fully
 * understand the workings of site.def and all the various '.cf' files.
 *
 * These are the most common settings you would choose for compiling and
 * installing XFree86 on the systems supported by it.
 *
 * A good way to use this file is to copy it to host.def, and make the
 * changes there.  That way, future patches to this file won't fail.
 * The host.def file will never be patched.
 *
 * The distributed version of this file should contain no uncommented
 * definitions.  Such default definitions belong in xfree86.cf.
 */
/******************************************************************************/

/*
 * If you have build-specific modifications in your host.def file, but
 * want an empty host.def file installed when doing 'make install',
 * uncomment the following
 *
#define InstallEmptyHostDef
 */

/*
 * If you want to enable some developer settings, like more verbose
 * compiler warnings, uncomment this.
 *
#define XFree86Devel	YES
*/

/*
 * If using GCC 2.x on a system where it isn't the default, uncomment
 * the following
 *
#define HasGcc2		YES
#define HasGcc		YES
 */

/*
 * If using GCC 2.x with C++ on a system where it isn't the default, uncomment
 * the following.
 *
#define HasGcc2ForCplusplus	YES
 */

/*
 * The default optimisation flags for GCC 2.x.  -fno-strength-reduce is
 * here to work around a bug in -O2 for GCC 2.x on i386 platforms.
 * If you are using a version that doesn't have this bug, you can
 * uncomment the following line, and remove '-fno-strength-reduce'
 * If you are building binaries for a 486, it may be beneficial to add
 * -m486
 *
#define DefaultGcc2i386Opt	-O2 -fno-strength-reduce
 */

/*
 * This allows the GCC warning flags to be set.  The default is shown here.
 *
#define GccWarningOptions -Wall -Wpointer-arith -Wstrict-prototypes \
                          -Wmissing-prototypes -Wmissing-declarations \
                          -Wredundant-decls -Wnested-externs
 */

/* 
 * Sun Compiler stuff.. 
 *
#define HasSunC                         YES
#define HasSunCplusplus                 YES
#define CplusplusCompilerMajorVersion   5
#define CplusplusCompilerMinorVersion   0
#define CCompilerMajorVersion           5
#define CCompilerMinorVersion           0
 */

/*
 * Optimized Sun Compiler Build.
 *
#define DefaultCDebugFlags              -xO4 -xtarget=pentium_pro
#define OptimizedCDebugFlags            -xO4 -xtarget=pentium_pro
 */

/* 
 * Debuggable Sun Compiler Build. 
 * Note: This builds _EVERYTHING_ as debuggable
 *
#define DefaultCDebugFlags              -g -xs
#define OptimizedCDebugFlags            -g -xs
 */

/*
 * For Linux, this should match the Binutils version you have.  This example
 * is for 2.6.0.7.  See linux.cf for the default setting.
 *
 * This should automatically get set correctly by imake.
 *
#define LinuxBinUtilsMajorVersion	26
 */

/*
 * For Linux, these should match the libc version you have.  This example
 * is for libc.5.4.x.  See linux.cf for the default setting.
 *
 * This should automatically get set correctly by imake.
 *
#define LinuxCLibMajorVersion	5
#define LinuxClibMinorVersion	4
 */

/*
 * If you want to use the GNU malloc library, uncomment this
 *
#define UseGnuMalloc		YES
 */

/*
 * Set this to whatever is required to access the GNU malloc library.
 * The default is '-lgmalloc' unless is specified in the OS's .cf file.
 *
#define GnuMallocLibrary	-L/usr/local/lib -lgmalloc
 */

/*
 * To enable the internal Xserver malloc, uncomment this
 *
#define UseInternalMalloc	YES
 */

/*
 * Some Linux releases don't have a libtermcap.  In this case you may need
 * to uncomment the following
 *
#define TermcapLibrary		-lncurses
 */

/*
 * If you have Tk (which is required to build XF86Setup), uncomment this
 * Note: version 4.0 or 4.1 is required, and XF86Setup links it statically by
 * default.
 *
#define HasTk			YES
 */

/*
 * Set the paths and names for your Tk library if they don't match the
 * defaults (check your OS .cf file or Imake.tmpl for the defaults).
 *
 * Common values for TkLibName are tk4.0, tk4.1, etc.
 *
 * Some Linux releases need TkIncDir set to /usr/include/tcl, and some
 * need it set to /usr/X11R6/include.
 *
 * Some Linux releases need TkLibDir set to /usr/X11R6/lib
 *
#define TkLibDir		/usr/local/lib
#define TkIncDir		/usr/local/include
#define TkLibName		tk
 */

/*
 * By default, XF86Setup is linked with a static Tk library.  To change
 * that, uncomment the following line.
 *
#define XF86SetupUsesStaticTk	NO
 */

/*
 * If you have Tcl (which is required to build XF86Setup), uncomment this
 * Note: version 7.4 or 7.5 is required, and XF86Setup links it statically by
 * default.
 *
#define HasTcl			YES
 */

/*
 * Set the paths and names for your Tcl library if they don't match the
 * defaults (check your OS .cf file or Imake.tmpl for the defaults).
 *
 * Common values for TclLibName are tcl7.4, tcl7.5, etc.
 *
 * Some Linux releases need TclIncDir set to /usr/include/tcl.
 *
#define TclLibDir		/usr/local/lib
#define TclIncDir		/usr/local/include
#define TclLibName		tcl
 */

/*
 * By default, XF86Setup is linked with a static Tcl library.  To change
 * that, uncomment the following line.
 *
#define XF86SetupUsesStaticTcl	NO
 */

/*
 * Build a server that dynamically loads the modules by setting
 * this to YES.  This defaults to YES on most platforms.  A static server
 * can be built by setting this to NO.
 *
#define DoLoadableServer	NO
 */

/*
 * Build dlopen() style modules instead of the standard loader modules.
 *
#define MakeDllModules		YES
 */

/*
 * Which servers to build.  There is now only one XFree86 server.
 * It can be disabled by the following.
 *
#define XF86Server		NO
 */

/*
 * To disable building the Xnest server, uncomment this.
 *
#define XnestServer		NO
 */

/*
 * To disable building Xvfb, uncomment this.
 *
#define XVirtualFramebufferServer	NO
 */

/*
 * To disable building Xprt, uncomment this.
 *
#define XprtServer NO
 */

/*
 * Set the default server (ie the one that gets the sym-link to "X")
 *
#define ServerToInstall		XFree86
 */


/*
 * Server configuration parameters.  The defaults are shown here:
 */

/*
 * Which drivers to build.  When building a static server, each of these
 * will be included in it.  When building the loadable server each of these
 * modules will be built.
 *
#define XF86CardDrivers		mga glint nv tga s3virge sis rendition \
				neomagic i740 tdfx savage \
				cirrus vmware tseng trident chips apm \
				GlideDriver fbdev i128 \
				ati AgpGartDrivers DevelDrivers ark cyrix \
				siliconmotion \
				vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
 */

/*
 * To add third party drivers to the standard driver list, set the
 * following.
 *
#define XF86ExtraCardDrivers	extradriver1 extradriver2 ...
 */

/*
 * There are three parameters that determine where and how the Matrox HAL
 * library is used:
 *
 *   HaveMatroxHal  -- You have the HALlib.a binary library installed
 *                     in xfree86/drivers/mga/HALlib, and you want it to
 *                     be used.
 *                     Default: NO
 *
 *   BuildMatroxHal -- You have the source for the HALlib library (installed
 *                     in xfree86/drivers/mga/hallib), and want to build and
 *                     use it.
 *                     Default: NO
 *
 *   UseMatroxHal   -- You want to build support for loading/using the HAL
 *                     library into the mga driver.  For module server builds
 *                     you don't need to have the HALlib library to do this.
 *                     but you want to build support for loading it and using
 *                     it into the mga driver module.
 *                     Default: YES for loadable server build
 *                              (HaveMatroxHal || BuildMatroxHal) for static
 */

/*
 * To disable use of the Matrox HAL library, uncomment this:
 *
#define UseMatroxHal		NO
 */

/*
 * If you have the HALlib.a binary installed in xfree86/drivers/mga/HALlib,
 * uncomment this:
 *
#define HaveMatroxHal		YES
 */

/*
 * If you have the HALlib source code installed in xfree86/drivers/mga/hallib,
 * uncomment this:
#define BuildMatroxHal		YES
 */

/*
 * Build XAA.  This can be disabled with:
 *
#define XF86XAA			NO
 */

/*
 * Build vgahw.  This can be disabled with:
 *
#define XF86VgaHw		NO
 */

/*
 * Build xf1bpp.  This can be disabled with:
 *
#define XF1Bpp			NO
 */

/*
 * Build xf4bpp.  This can be disabled with:
 *
#define XF4Bpp			NO
 */


/*
 * BSD Console driver support (for FreeBSD and NetBSD).
 *
 * By default, support is included for pccons and pcvt for NetBSD, and
 * pccons, syscons and pcvt for FreeBSD.
 *
 * To change the list of supported drivers, set the following parameter.
 * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT.
 * The following example includes support for syscons and pcvt only.
 *
#define XFree86ConsoleDefines	-DSYSCONS_SUPPORT -DPCVT_SUPPORT
 */

/*
 * If you only run the X server under xdm the X servers don't need to be
 * installed SetUID, and you may comment out the lines below.  If you run
 * the servers by hand (with xinit or startx), then they do need to be
 * installed SetUID on most OSs.
 * Consult your system administrator before making the X server setuid.
 *
#define InstallXserverSetUID	NO
 */

/*
 * To link the X server with a dynamic version of the Xfont library,
 * uncomment this.
 *
#define XserverStaticFontLib	NO
 */

/*
 * To disable building the font server, uncomment this.
 *
#define BuildFontServer		NO
 */

/*
 * To disable support for Speedo fonts, uncomment this.
 *
#define BuildSpeedo		NO
 */

/*
 * To disable support for Type1 fonts, uncomment this.
 *
#define BuildType1		NO
 */

/*
 * To disable support for CID fonts, uncomment this.
 *
#define BuildCID		NO
 */

/*
 * To disable support for TrueType fonts, uncomment these.
 *
#define BuildFreeType		NO
#define BuildXTrueType		NO
 */

/*
 * To enable binary compatibility with previous versions of the font
 * encoding support, uncomment this.
 *
#define FontencCompatibility    YES
 */

/*
 * Do you want to Build Fonts (Usually you only want to build and install
 * fonts once, if this is a first time install you will want to build the
 * fonts)
 *
#define BuildFonts		NO
 */

/*
 * To not build/install the 75dpi fonts, uncomment the following
 *
#define Build75DpiFonts		NO
 */

/*
 * To not build/install the 100dpi fonts, uncomment the following
 *
#define Build100DpiFonts	NO
 */

/*
 * To not build/install the Speedo fonts, uncomment the following
 *
#define BuildSpeedoFonts	NO
 */

/*
 * To not build/install the Type1 fonts, uncomment the following
 *
#define BuildType1Fonts		NO
 */

/*
 * To not build/install the CID fonts, uncomment the following
 *
#define BuildCIDFonts		NO
 */

/*
 * To not build/install the True Type fonts, uncomment the following
 *
#define BuildTrueTypeFonts	NO
 */

/*
 * To not build/install the Cyrillic fonts, uncomment the following
 *
#define BuildCyrillicFonts	NO
 */

/*
 * To not build/install the Latin2 fonts, uncomment the following
 *
#define BuildLatin2Fonts	NO
 */

/*
 * To not install the local font directory, uncomment the following
 *
#define MakeLocalFontDir	NO
 */

/*
 * To build only the servers with a cut-down source tree, uncomment
 * this.
 *
#define BuildServersOnly	YES
 */

/*
 * To disable building XInput support, uncomment this
 *
#define BuildXInputExt		NO
 */

/*
 * Select the XInput devices you want by uncommenting this.
 *
#define XInputDrivers		mouse acecad calcomp citron \
				digitaledge dmc dynapro elographics \
				microtouch mutouch penmount spaceorb summa \
				wacom void magictouch
 */

/*
 * Uncomment this for joystick support.
 *
 * Note: Joystick support is only included for Linux and FreeBSD at the
 * moment.  For Linux it requires the Joystick module to be installed (it
 * isn't part of the standard kernel distribution).  For FreeBSD, a kernel
 * will need to be built with the Joystick driver in order to be able to
 * use this.
 *
#define JoystickSupport YES
 */

/*
 * To disable the ScreenSaver Extension, uncomment this line.
 *
#define BuildScreenSaverExt	NO
 */

/*
 * If you don't want to build PEX, uncomment this.
 *
#define BuildPexExt		NO
 */

/* 
 * If you don't want to build Xinerama support, uncomment this.
 *
#define BuildXinerama		NO
 */

/*
 * If you don't want to build support for an external GLX server module or
 * library, uncomment this.
 *
#define BuildGlxExt             NO
 */

/*
 * If you want to build support for the old dlopen style external GLX
 * server module or library, uncomment this.
 *
#define GlxStubLib              YES
 */

/*
 * If you aren't building with support for loadable modules and wish
 * to statically link external GLX server libs instead of the default
 * non-functional stub library, uncomment the following define and
 * specify the space-seperated pathnames of those libraries here.
 *
#define GlxStaticServerLib	/full/path/name/to/glx/servGL/libServerGlx.a \
				/full/path/name/to/glx/servGL/libMesaGlx.a
 */

/*
 * If you don't want to build XIE, uncomment this.
 *
#define BuildXIE		NO
 */

/*
 * If you want to build only the DIS (Document Imaging Subset of XIE)
 * uncomment this line.  This option is only relevant when XIE is built.
 *
#define BuildDIS		YES
 */

/*
 * If you don't want to build the xf86rush extension, uncomment this line.
 *
#define BuildXF86RushExt	NO
 */

/*
 * If you don't want to build the client library for the xf86rush extension,
 * uncomment this line.
 *
#define BuildXF86RushLibrary	NO
 */

/*
 * By default, the sample config files for xinit, xdm and xfs are installed
 * only when there is no pre-existing version installed.  Uncommenting the
 * following lines will force the sample versions to be installed even if
 * it means over-writing existing versions.
 *
#define InstallXinitConfig	YES
#define InstallXdmConfig	YES
#define InstallFSConfig		YES
 */

/*
 * By default the application defaults files are always installed.
 * Uncommenting the the following will prevent exising application
 * defaults files from being over-written.
 *
#define InstallAppDefFiles	NO
 */

/*
 * If you are running NetBSD 0.9C or later, and have the aperture driver
 * installed, uncomment this.
 *
#define HasNetBSDApertureDriver	YES
 */

/*
 * If you are running SVR3 and have the mmap driver installed (for linear
 * framebuffer access) uncomment this.
 *
#define HasSVR3mmapDrv	YES
 */

/*
 * If you are using an SVR3 (like ISC 4.x) which supports long file names,
 * you can * uncomment this to have manual pages installed under their
 * full names
 *
#define ExpandManNames		YES
 */

/*
 * For a POSIXized build on Interactive uncomment this
 * Could be used with gcc 'till Version 2.6.3
 * Should be used with gcc 2.7.2. 
 *
#define UsePosix		YES
 */

/*
 * If you want XDMAUTH support (if you have Wraphelp.c), uncomment this.
 *
#define HasXdmAuth		YES
 */

/*
 * If you have Linux DECnet support, and want to build XFree86 with support
 * for connections over DECnet, uncomment this.
 *
#define HasDECnet		YES
 */

/*
 * To build static and shared libraries with debugging information, uncomment
 * this. Assumes you have Gcc2.
 * (If you don't have Gcc2, you can use the DebugLib{X11,Xt,Xaw,...} variables
 * to build debugging versions of the libraries separately.)
 *
#define DebuggableLibraries	YES
*/

/*
 * To forceably build static libraries in addition to shared libraries,
 * uncomment this.
 *
#define ForceNormalLib		YES
 */

/*
 * Uncomment this if your default tools (eg, gcc, ld, as, etc) are
 * not the Linux ELF versions.
 *
#define LinuxElfDefault		NO
 */

/*
 * To use ELF format shared libraries for supported OSs, uncomment this.
 *
 * For Linux the default setting of this is the same as the setting of
 * LinuxElfDefault.
 *
 * For FreeBSD this should automatically be set correctly by imake.  Only
 * change it here if you need to override the automatic setting.
 *
#define UseElfFormat		YES
 */

/*
 * For FreeBSD/ELF (FreeBSD 3.0) it is possible to also build and install
 * a.out compatibility libraries.  To enable that, uncomment this.
 *
#define BuildAoutLibraries	YES
 */

/*
 * If you have trouble with make bombing out in Xlib, try uncommenting this.
 * You will not get dependencies as a result, but better than nothing.
 *
#define MakeHashTableBug        YES
 */

/*
 * If you do not want your man pages compress under SVR3 systems that
 * support it, uncomment this.
 *
#define CompressManPages        NO
 */

/*
 * If you have sgmlfmt (the XFree86 doctools package) and want to build
 * formatted docs from the SGML source, uncomment this.
 *
#define HasSgmlFmt		YES
 */

/*
 * To disable building some document formats, uncomment some of these.
 *
#define BuildLinuxDocText	NO
#define BuildLinuxDocHtml	NO
#define BuildLinuxDocPS		NO
 */

/*
 * To install Japanese versions of the documentation uncomment this.
 * Note: The Japanese documentation consists of a subset of the
 * XFree86 3.1 docs.
 *
#define InstallJapaneseDocs	YES
 */

/*
 * To build/install X specs docs, uncomment the following.
 * The SpecsDocDirs setting here is recommended because it covers
 * the docs that XFree86 has changed or added.
 *
#define BuildSpecsDocs		YES
#define SpecsDocDirs		CTEXT GL ICCCM X11 Xext Xmu Xv XvMC i18n xterm
 */

/*
 * To build all specs docs, not just those listed in SpecsDocDirs, uncomment
 * the following.
 *
#define BuildAllSpecsDocs	YES
 */

/* 
 * To enable building the glide driver, you need to define 
 * HasGlide2 to YES and set the Glide2IncDir variable. 
 * HasGlide2 is per default NO.
 *
#define HasGlide2 YES
 */

/*
 * Set the path to your Glide include files.
 *
#define Glide2IncDir /usr/include/glide
 */

/* 
 * The 3Dfx 3D DRI driver requires glide 3.
 *
#define HasGlide3 YES
 */

/*
 * Set the path to your Glide 3 include files.
 *
#define Glide3IncDir /usr/include/glide3
 */

/*
 * Undefine the following if you don't want to have config files and
 * app-defaults installed in a separate directory (i.e. /etc/X11).
 *
#define UseSeparateConfDir NO
 */

/*
 * If your system doesn't support vm86() mode and you have
 * libx86emu set library path here
 *
#define X86EMU_LIBPATH /usr/local/lib
 */ 


/*
/* Followins are generated by FreeBSD imake-4/XFree86-4-* ports system.
 */
#ifndef HasSecureRPC
#define HasSecureRPC YES
#endif
#ifndef HasXdmAuth
#define HasXdmAuth YES
#endif
#ifndef HasPam
#define HasPam YES
#endif
#ifndef BuildPexExt
#define BuildPexExt YES
#endif
#ifndef BuildXinerama
#define BuildXinerama YES
#endif
#ifndef BuildXIE
#define BuildXIE YES
#endif
#ifndef BuildAoutLibraries
#define BuildAoutLibraries NO
#endif
#ifndef ForceNormalLib
#define ForceNormalLib YES
#endif
#ifndef JoystickSupport
#define JoystickSupport YES
#endif
#ifndef InstallXdmConfig
#define InstallXdmConfig YES
#endif
#ifndef InstallXinitConfig
#define InstallXinitConfig YES
#endif
#ifndef InstallAppDefFiles
#define InstallAppDefFiles YES
#endif
#define XInputDrivers mouse digitaledge dynapro elo2300 				elographics magellan 				microtouch mutouch spaceorb summa 				wacom void citron
#ifndef Build75DpiFonts
#define Build75DpiFonts YES
#endif
#ifndef Build100DpiFonts
#define Build100DpiFonts YES
#endif
#ifndef BuildSpeedoFonts
#define BuildSpeedoFonts YES
#endif
#ifndef BuildType1Fonts
#define BuildType1Fonts YES
#endif
#ifndef BuildCIDFonts
#define BuildCIDFonts YES
#endif
#ifndef BuildTTFonts
#define BuildTTFonts YES
#endif
#define BuildXF86Setup NO
#define HasFreetype2 YES
#define Freetype2Dir /usr/local
#ifndef XF86CardDrivers
#ifdef i386Architecture
#define XF86CardDrivers         mga glint nv tga s3virge sis rendition                                 neomagic i740 tdfx savage                                 cirrus vmware tseng trident chips apm                                 GlideDriver fbdev i128                                 ati AgpGartDrivers DevelDrivers ark cyrix 				siliconmotion 				vesa vga XF86OSCardDrivers XF86ExtraCardDrivers
#else
#ifdef AlphaArchitecture
#define XF86CardDrivers         mga tdfx glint s3virge rendition tga 				savage nv DevelDrivers siliconmotion vga 				XF86OSCardDrivers XF86ExtraCardDrivers
#endif
#endif
#endif
#define NothingOutsideProjectRoot YES
